Industry Red 650nm Line Laser Module
High Product Quality
High Quality Elliptical and Circular Beams
|Model||Industry Red 650nm Line Laser Module|
φ9*20mm φ9*23mm φ12*38mm φ18*45mm
|Mean time to failure(MTTF)||6000～30000Hour|
405nm 450nm 520nm 532nm 635nm 650nm 660nm 808nm 980nm
|Laser power (constant power):|
Japanese standard: 0.25MW～0.39MW
European standard: 0.45MW～0.85MW
American standard: 1MW～5MW (please consult for other power)
|Operating temperature||-10℃～40℃(75℃ optional)|
|Spot mode (spot size)||The light spot at 10 meters is less than φ10mm*15mm (according to
- Lasers emitted by the laser module may damage people's eyes;
therefore, do not look directly at its end, and wear appropriate
safety glasses to prevent the work of the laser.
- When the laser module is connected to the power supply, the laser
module needs a suitable laser driver (PCB), please set the output
voltage to zero. The current adjustment should be slowly increased
or reduced to avoid damage to the equipment.
- keep the equipment working or storing in dry environment.
- working at high temperature will increase threshold current, reduce
conversion efficiency and accelerate the aging of accelerator
- when the output power is higher than its "specific operating
parameters", it will accelerate the aging of the device.
Note : Laser module housing is an electrical positive surface, it
is imperative that contact between the laser moduleand the machine
be avoided. This is to prevent damage from the machine electrical
leakage. Surge protected power supply to the laser module is
Our factory introduces advanced technology from Taiwan, and
specializes in the production of dust-free workshops: laser diodes,
laser modules, lasers, laser heads, laser tubes, instruments and
equipment are imported from the United States, Japan, and Taiwan.
We have 16 years of production and R&D experience; we have
obtained TUV. FDA ROHS CE and other international authority safety
and environmental protection export certificates.